SM-J3 Automatic Feeding Machine

Basic Functions of Feeder

1. Automatic and manual feeding.

2. Wall collision, rotation limit, straight limit, temperature overrun and belt lost rotation alarm.

3. Quantitative feeding.

Feeder Initial Parameter Setting:

1. Parameter entry is operated on the touch screen.

2. Click "Settings" through the first interface to enter the "Feeding System Settings" interface, and click the "Initial Parameters" button to enter the initial parameter settings interface.

3. The initial distance refers to the distance from the rotation center of the feeder to the initial feeding position. Unit mm.

4. Straight travel length: The maximum feedable length of the rotary arm traveling straight in the kiln. Unit: mm.

5. Straight step: the interval of feeding each step.unit: mm

6. Rotation speed: the linear speed of swing arm swing. Unit: mm / s

7. Rotation speed: the linear speed of swing arm swing. Unit: mm / s

8. Rotation speed: the linear speed of swing arm swing. Unit: mm / s

9. Rotation speed: the linear speed of swing arm swing. Unit: mm / s

10. Straight speed: the speed when the swing arm moves forward.

Unit: mm

11. Rotation ratio: the reduction ratio of the rotating system reducer

12. Straight travel ratio: the speed reduction ratio of the straight travel system

13. Over-temperature delay: After the temperature is too high, it can prevent the delay of false alarm. Unit: second

14. Vibration delay: During the automatic feeding process, to prevent the belt from being empty, the vibration feeder is delayed.

15. Feeding interval: the time interval of each feeding. Unit: minutes

16. Belt speed: determine the minimum speed of belt loss.

Note: If the basic parameters of feeding are adjusted, the coordinate calibration needs to be performed again.

http://www.glassware-machinery.com/